Xantech ML85K Bedienungsanleitung PDF herunterladen (Seite 1)

INSTALLATION INSTRUCTIONS

ML85K

Micro Link™ Peep Hole Style

Plasma\LCD\LED\CFL Friendly

IR Receiver

DESCRIPTION

The Micro Link IR Receiver is a small peep-hole style infrared repeater

assembly. The Micro Link IR Receiver is equipped with a 7-foot cable and a

3.5mm stereo mini plug, which is plugged directly into the “IR RCVR” jack on

the connecting block, such as the models 789-44, CB60, and 791-44. The

Micro Link IR Receiver is primarily intended for use in installations where the

connecting block is within reach of its 7-foot cable – as when installing the

Micro Link IR Receiver in a cabinet where the controlled equipment is behind

closed doors.

FEATURES

• Small size; mounts in 1/2” diameter hole. 2 inches deep (50mm).

• Quick-Connect 3.5mm Stereo Mini Plug on 7ft. cable for direct plug-in to

Xantech Connecting Blocks.

• Works in normal 3-wire mode (12VDC, IR, GND).

• Green Talkback LED for System Verification.

• Includes 789-44 Connecting Block, Power supply, and four 283D emitters

for easy system installation.

SPECIFICATIONS

• Infrared modulation frequency bandwidth: 30 – 60 kHz.

• IR reception range: Up to 80 feet, depending on remote control output

strength and ambient conditions.

• Reception angle: 55 degrees off axis for 50% range reduction.

• Cable requirements: 3-conductor. Use 24 gauge up to 200’, 22 gauge up

to 600’ 20 gauge up to 2000’, 18 gauge up to 5000’ – unshielded OK.

• Max. transmission length: 1 mile using 18 gauge wire.

• Maximum current output: 100mA

• Drives IR emitters through Xantech Connecting Blocks, Controllers, etc.

• Dimensions: 1/2” diameter x 2” deep (13mm x 50mm).

• Power requirements: +12VDC, 20mA.

1 2 3 4 5 6 7 8

Inhaltsverzeichnis

Seite 1 - INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS ML85K Micro Link™ Peep Hole Style Plasma\LCD\LED\CFL Friendly IR Receiver 1 DESCRIPTION The Micro Link IR

Seite 2 - INSTALLATION

2 INSTALLATION QUICK-START A typical system will use an IR receiver, several emitters, and a power supply all connected to a connecting block. 1.

Seite 3 - 781ERGPS

4 LARGE SYSTEM APPLICATION The ML85 IR receiver is compatible with all Xantech Connecting Blocks. Different connecting blocks are provided for applic

Seite 4

6 ITEM C: (4) 283D Designer Emitters ITEM D: (1) 781ERGPS Power Supply STEP 1: Plug in the 2.1mm Coaxial power plug of the 781ERGPS Power Supply (

Seite 5 - IR Troubleshooting Guide

8 IR Troubleshooting Guide NOTE: Due to the many variables in a given installation, the troubleshooting countermeasures you will have to take may v

Seite 6

10 Symptom #3: TB LED on IR Receiver (and/or Emitters) on solid Cause: Solution 1. Plasma Interference Use a 85 or 95 series Plasma 'Friend

Seite 7

12 Symptom 6: Emitters function but some (or all) components do not respond. Cause: Solution 1. Emitter placement is incorrect. Reposition the E

Seite 8 - Limited Warranty

14 Limited Warranty Xantech® warrants its products to be free of defects in materials or workmanship. This is a Limited Lifetime warranty from the d

Kommentare zu diesen Handbüchern

Keine Kommentare

Xantech ML85K Bedienungsanleitung Seite 1

Stöbern Sie online oder laden Sie Bedienungsanleitung nach AV-Extender Xantech ML85K herunter. Xantech ML85K User's Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern